Ford Maverick Bedliner: Does the Composite Bed Need One?
The Ford Maverick changed what a lot of people expect from a small pickup, and its bed is a big part of that. Instead of steel, it uses a composite bed that will not rust and shrugs off many dings that would dent sheet metal. So a common question from new owners is whether a bedliner is even worth it. The answer depends on what you haul and how much you care about the bed’s appearance and grip.
What the Maverick bed already does well
- No rust. Composite does not corrode, so scratches will not turn into rust spots.
- Dent resistance. Dropped tools and bouncing cargo are less likely to leave lasting dents.
- Built-in organization. The FLEXBED design includes slots for lumber dividers, tie-down points and threaded holes for accessories.
- Lighter weight. Composite helps keep the truck efficient.
Where it still wears
- Scratches and scuffs. Composite still scratches, and on a newer truck those marks show.
- Slippery surface. Smooth plastic lets cargo slide around, especially coolers, totes and anything round.
- UV fading. Over years of sun, unprotected composite can fade and look chalky.
- Heavy abrasion. Gravel, firewood and landscaping material wear the surface over time.
Your options
| Spray-in liner | Drop-in liner | Bed mat | |
|---|---|---|---|
| Protects walls | Yes | Yes | No |
| Keeps cargo from sliding | Very good | Fair | Good on the floor |
| Works with FLEXBED slots and tie-downs | Yes, when masked carefully | Depends on design | Yes |
| Space used | None | Some | Minimal |
| Removable | No | Yes | Yes |
| Cost | Highest | Middle | Lowest |
Spray-in liners on a composite bed
A spray-in liner can be applied to a composite bed, but prep matters even more than on steel. Plastics and composites are harder to bond to, so a good shop will thoroughly clean and scuff the surface and use an adhesion promoter or primer recommended by the coating manufacturer. Ask how they handle the FLEXBED slots, tie-downs, threaded holes, lighting and any power outlet in the bed. Those features should stay usable after the job.
Benefits include a grippy texture that stops sliding cargo, full wall coverage and UV protection if a stable topcoat is used. If you are on the fence about doing it yourself, ArmorThane compares the approaches in spray-on bedliners vs DIY kits.
Drop-in liners
A drop-in can protect the walls and floor and come out when you want. On the Maverick, check that the design is made specifically for its bed and does not block the FLEXBED slots or tie-downs. A poor fit can trap grit that rubs the composite underneath.
Bed mats
For many Maverick owners, a rubber mat is the sweet spot. The composite bed handles dings on its own, and a mat adds grip and protects the floor from scratches at low cost. It does not protect the walls, but many owners are fine with that.
Which should you choose?
- Light use, mostly groceries and gear: A bed mat is usually enough.
- Frequent hauling, landscaping, DIY projects: A professionally applied spray-in liner offers the best protection and grip.
- Leased truck or want to keep it removable: A well-fitted drop-in or mat.
Check the warranty
Before any spray-in work, ask the shop about adhesion warranties on composite beds and get the terms in writing. Top Bedliners explains what to look for in a spray-in bedliner warranty. And if you also own a full-size Ford, our guide to F-150 aluminum bed bedliners covers the different prep that aluminum needs.


